GATE REMOVER SET

Gate Perfect Solution Set

BRAND STORY

GATE REMOVER SET is a revolutionary product which reformed the conventional concept of gate-mark removing methods. It's GUNPRIMER's all time best seller and widely used by modelers worldwide since it's release.

Having difficulties removing gate-marks? Then this tool set will give you a brand new experience. Try it now!

GATE REMOVER SET

Perfect Solution for Removing Gate-marks

SKU: R-GRS

Made in Korea

SET INCLUDES

RASER (GATE REMOVER) x 1
BALANCER WHITE (GLOSS POLISHER) x 1
RECOVER (SEMI-GLOSS POLISHER) x 2
STORAGE CASE

The three high quality tools enclosed minimize the multiple steps for gate-mark removing process and bring a perfect surface to completion.

PERFECT SOLUTION FOR REMOVING GATE-MARKS

R A S E R

1/3

Step 1: Removing Gate-marks

Use the RASER to remove gate-marks.

Surface turns glossier than the original surface after the gate-mark is removed.

BALANCER

1/3

Step 2: Balancing Gloss Level

Use the BALANCER WHITE's green side to turn the glossy surface (step 1) to a matte surface. This is the preliminary step before balancing the level of glossiness.

RECOVER

1/3

Step 3: Recovering Gloss Level

Use the RECOVER to the matte surface (step 2) to restore the gloss level of the original plastic parts. This completes the Gate-marks removal process with a perfect finish.

** Each product's unique function can be used in various combinations depending on different user levels and methods. Please refer to each product description page for more detail.

PRODUCT SPECS & FEATURES

RASER v1.5

GATE REMOVER

Super-Nano Technology

Material: Tempered Glass

Size : 11*90*3mm

Made in Korea

The name RASER is derived from combining the two words GATE + ERASER. It's a new concept of sanding tools that leaves no scratches when removing gate-marks.

Super-Nano Technology is applied to RASER v1.5 for improved abrasive performance.
** applied since May 2020

v1.5 - Super-Nano Technology

With 400 grit force, RASER v1.5 can easily remove thick gate-marks to produce a clean surface without any scratches. Evolutionary super-nano technology provides a strong 400 grit force incomparable to any other similar products.

Handcrafted Smooth Edge

Handcrafted smooth edges leave no scratches on the plastic surfaces and it goes through a strict QA process to ensure the safe use by users of all ages.

RASER

1/3

Using on Clear Parts

When removing the gate-mark on the clear parts, it's sufficient enough to use only the RASER alone.

BALANCER WHITE

GLOSS POLISHER
Ultra-Fine Technology

Material: High Density Sanding Sponge
Size : 18*90*15mm

BALANCER is used after the gate-mark is removed with the RASER to balance the gloss level of the surface.
Depending on the user's methods, it can be used to process matte, semi-gloss or gloss surfaces.

Features

Green side is used for pre-processing the surface before making a glossy surface.

After using the green side, a super glossy surface can be acquired using the white side.

RECOVER

SEMI-GLOSS POLISHER
Twill Weave Technology

Material: Functional fabric (Poly + Cotton)
Size : 90*90mm x 2

RECOVER is a finish touch-up polisher to restore the original gloss level of plastic parts.

It polishes the rough surface from sanding and adds a bit of extra shiny look on the surface.

First, use the BALANCER's green side then use the RECOVER to retrieve the plastic's original semi-gloss surface. This step is crucial to have a perfect finish when removing the gate-marks and it's highly recommended for users who don't paint nor use top-coat after building.

STORAGE CASE

Packaging case is designed as a reusable storage case for longer lasting care of valuable tools.
Big enough size is easy and convenient to store several GUNPRIMER's tools and much more. (Make sure to remove the foam insert before using it as a storage case)

IMPORTANT

Residues stuck on the RASER, BALANCER and RECOVER's surface can decrease performance. To remove residues, clean with water or masking tape. If cleaning with water, dry completely before using.
Tempered-glass made RASER does not break during normal use. However, it can be damaged from external shocks and drops. Always store in a storage case when not in use.
Only use on plastics. Do not use on the metals.
Do not wet the storage case as it's made of hard paper.